Inspect your hot water heater regularly
You must pay attention to the operation of the heater, it is silent, but this device can be very dangerous.
Start by inspecting each element and look for signs that will tell you if your boiler is broken. If you do not pay attention you will run out of hot water, or worse you may run the risk of the heater exploding.
The average life of boilers is from 8 to 15 years, depending on the model.
Signs that you must check a heater
- Corrosion in the body of the heater or in any other part of the metal which could be rusted, if it is, you must change it
- Rusty water under the heater or rusty colored water coming out of the shower or sink
- Every time there is less hot water without adjusting the temperature. If that happens that something is not working well
- Humidity around the device, it is possible that there is a slow leak that could worsen over time if it is not replaced. If there is a flooded area, it is very difficult for the device to be repaired
- Components of the burner, these could clog and rust, to verify this part you need to remove the heater gate
- Verify the copper connectors
- Possible signs of harmful leaks for the connections, that is why the tartar begins to form
- Relief valve is very important since it serves to prevent the water heater from exploding due to the high pressures, check this valve every year
- How do you check it? Pull the handle, so that the water flows, when you stop pulling the handle then the fluid will stop. If you see that the valve does not let water drip, you should repair or replace it
For any water heater repairs or services in Denver, contact All Area Appliance Repair services for assistance today! We can help with all home and kitchen appliance repairs and services!